Tiered card rack - slatwall
Ref : G53 range
Contents:
Card racks X 3 (or 5 or 7 depending on style purchased)
Left hand side panel
Right hand side panel
(Extra panel for middle support if you are assembling a metre length style)
Pack of pushfit fasteners
Method
1) MOST IMORTANT! Peel the polythene off every piece in the kit. Make sure
you peel off BOTH sides of each piece - front and back.
2) If you are putting together a 24" tiered rack you will have 2 sides one
of which is designed to be left hand and one right. Insert these into your
slatwall slot. If you are putting together a
metre rack you will have an extra piece which you should insert into the
wall at the middle point.
3) Now take one of the racks and starting at the bottom level fix it to the
side(and middle if appropriate) sections by pushing through the plastic
fastener. Please note these need pushing through until your hear them click.
It is essential that they are pushed through properly; if they do not click
fasten they will not hold.
4) Continue attaching the racks working upwards to the top one.
5) Fill with stock and watch it sell!
NB These racks are NOT designed to be free-standing