2.5cm Groovewall fixing screws x100

2.5cm Groovewall fixing screws: pack of 100 (W05000) This pack of 100 slatwall fixing screws is ideal for installing Groovewall slatwall panels.   

Slatwall Corner Trim

Slatwall corner trim: corner trim for slatwall panels (W08000) This corner trim is intended for use when joining slatwall panels at right angles (90°). It is not essential but will cover the sawn edge and add the finishing touch.   Slatwall Corner Trim Details... > Panel size: Height - 200cm : Width - 2.5cm : Depth - 4cm  > White PVC > To be used with the W10000 or W1000K slatwall panels.      

Slatwall Side Trim

Slatwall side trim: side trim for slatwall panels (W09000) This corner trim is intended for covering the ends of the slatwall panels purchased from 3D Displays.  The trim be used on the end of a single panel or the end of a run of panels.  Or you may prefer to cover the ends of every panel. It is not essential but will cover the sawn edge and add the finishing touch.   Slatwall Side Trim Details... > Panel size: Height - 200cm : Width - 3cm > White PVC > To be used with the W10000 or W1000K slatwall panels.  

5cm Slatwall fixing screws x100

5cm Slatwall fixing screws: pack of 100 (W04000) This pack of 100 slatwall fixing screws is ideal for installing Groovewall slatwall panels.  Pack Details... > White Coated Steel > 5cm  > Pack of 100 > Ideal for installing W10000 slatwall panels* > Shorter 2.5cm fixing screws also available  *Not suitable for all wall types

Groovewall fixing screws: pack of 100 (slatwall: shop fittings)

2.5cm Slatwall fixing screws: pack of 100 (W06000) This pack of 100 slatwall fixing screws is ideal for installing slatwall panels.  Pack Details... > Zink > 2.5cm  > Pack of 100 > Ideal for installing W10000 slatwall panels* > Longer 5cm white coated screws are also available.  *Not suitable for all wall types

M6 eye bolt set: Fixings

M6 eye bolt set: Exhibition panel fixings This eye bolt set allows the W20000 exhibition panel to be easily and securly attached to Octanorm© shell scheme without leaving a trace. The fixing set is comprised of two eyebolts, two washers and two nuts. Assemble the W20000 or W2000P as per their instructions.  Loop a cable tie through the top of the exhibition panel.  Place this eye bolt set in the top of the shell scheme exhibition upright and use a second cable tie to loop through the eye bolt set and first cable tie. Detailed instructions can be downloaded here. More about these fixings... > Zinc plated steel > Each eye bolt is 10cm long > Instructions  

30cm cable ties: pack of 100

Cable Ties: pack of 100 (W29000) These cable ties can be used as part of the Slatwall exhibition system to secure the panel to the exhibition shell scheme.  Cable Tie Details... > Made from natural nylon > Length: 30cm > Pack of 100